Porsche Heads (6)
· Disassembled and Inspected
· Bead blasted
· Valve guides installed
· Valve stem seals installed
· Complete valve job
· Valve spring height adjusted
· Head matting surface inspected
· Deck height checked for proper
compression
· Porting and Polishing available
Porsche Pistons
& Porsche Cylinders
(6)
· Clean and Inspect Pistons and
Cylinders for correct tolerances
· Compression ratio given
· Polished piston pins
· Polished piston bores
· Piston ring grooves cleaned
· Cylinders Re-Machined
· Cylinders & Pistons prepped for
rings and installed for easy installation
Porsche
Upper Valve Covers
· Checked for warped and cracks
· Machined surfaces
Porsche Lower Valve Covers
· Checked for warped and cracks
· Machined surfaces
Porsche Chain Housing
Covers
· Checked for warpage and cracks
· Machined surfaces
Porsche
Chain Housings
· Cleaned and Inspected
· Cover matting surface hand prepped
· Case matting surface, resurfaced
· Rear of housings cold welded sealing
leaks |
Porsche Camshafts (2)
· Inspect for camshaft wear or damage
· Measured for lift and duration
· Polished bearing surface
Porsche Rockers
(12)
· Radius re-surfaced
· Bores polished
Porsche Rocker Shafts (12)
· Cleaned
· Polished
Porsche Camshaft
Housings
· Cleaned and Inspected
· Camshaft housings resurfaced
· Camshaft spray bars cleaned and tested
· Valve cover matting surface hand
prepped
· Outer camshaft bores polished
Porsche Camshaft Sprockets
· Inspected for wear
· Cleaned and debured
Porsche Idler
Sprockets
· Inspected for wear
· Cleaned and debured
Porsche Camshaft
Aluminum Cover Plates
· Cleaned and inspected
· Resurfaced
Porsche Idler
Arms
· Cleaned and Inspected
Porsche Chain
Tensioners
· Clean and Inspect
· Test for correct tension
|
Porsche Crankshaft
· Magnufluxed
· Micropolished
· Checked for straightness
Porsche
Intermidateshaft & Gear
· Gear inspected for wear
· Gear measured for tolerance
· Shaft bearing wear measured
· Shaft microppolished
Porsche Intermidateshaft
Cover Plate
· Inspected for cracks
· Cleaned and resurfaced
Porsche
Oil Pump
· Ready for installation
· Oil pump dissembled and gears polished
and debured
Porsche Engine Case
· Case cleaned
· All bearing saddles prepped
· Line bore measured and inspected
· Case matting surfaces hand resurfaced
· Chain housing matting surface hand
resurfaced
· Oil breather matting surface hand
resurfaced
· Oil sump matting surface hand
resurfaced
· Pistons squirters cleaned and tested
· Intermidateshaft cover plate area hand
resurfaced
Porsche
Oil cooler
· Pressure Tested & Clean
· Matting surface machined
Porsche Connecting
Rods
·
Machine big
end
·
Bores polished
·
Check for proper
weight and balance
|
