|
|
Motor
Meister Zenith Carburetors
The Soles Zenith carburetor is a
good carburetor and can provide a reliability and performance. Yes you heard it here.
The Zeniths can provide the same power as Webers if done correctly. The biggest problem
with Zeniths had not been the quality, but instead, the variations of jets, emulsion
tubes, venturies, etc. To alter the performance. There was nothing being produced for
Zeniths to provide more power. Motor Meister sells, larger jets, venturies, etc. So do not
give up, we can provide your needs.
Zenith 40TIN
Click picture to enlarge.
Zenith Carburetors:
1-Carburetor housing ( 2 )
2-Air bypass screw ( 6 )
3-Emulsion tube ( 6 )
4-Air correction jet ( 6 )
5-Venturies ( 6 )
6-Pre-atomizer ( 6 )
7-Retaining clip ( 6 )
8-Main jet ( 6 )
9-Jet housing ( 6 )
10-gasket ( 6 )
11-Cap plug ( 6 )
12-gasket ( 6 )
13-Idle jet ( 6 )
14-Idler screw ( 6 )
15-Spring ( 2 )
16-Pump inlet valve ( 6 )
17-Spring ( 6 )
18-Diaphragm ( 6 )
19-Diaphragm plate ( 6 )
20-Screw ( 24 )
21-Injector ( 6 )
22-Plug ( 6 )
23-Cam track ( 1 )
24-Cam track ( 1 )
25-Washer ( 2 )
26-Nut ( 2 )
27-Pin ( 2 )
28-Pump shaft bracket ( 2 )
29-Pump shaft bracket ( 2 )
30-Screw ( 8 )
31-washer ( 8 )
32-Pump shaft
33-Pump shaft
34-Washer ( 2 )
35-Arm plate
36-Arm plate
37-Spring
38-Spring
39-C-clip ( 4 )
40-Washer for shaft ( 4 )
41-Nut for shaft ( 4 )
42-pin ( 6 )
43-Nut ( 6 )
44-Idle speed adjusting screw ( 6 )
45-Spring ( 6 )
46-Top body ( 2 )
47-Fuel floats ( 4 )
48-Float hinge ( 4 )
49-Float pin ( 4 ) |
50-Float hinge ( 4 )
51-Screw
52-Float level needle ( 4 )
53-Gasket ( 4 )
54-Plug ( 4 )
55-Gasket ( 4 )
56-Banjo blots ( 4 )
57-Fuel intake screens ( 4 )
58-Banjo gasket ( 8 )
59-Banjo double feed ( 2 )
60-Banjo single feed ( 2 )
61-Fuel line ( 2 )
62-Fuel line clamps ( 4 )
63-Body gasket ( 2 )
64-Return spring ( 2 )
65-Return spring holder ( 2 )
66-Screw ( 24 )
67-Top base gasket ( 2 )
68-Velocity stacks ( 6 )
69-Velocity stack studs ( 12 )
70-Velocity stack nuts ( 12 )
71-Spring ( 2 )
72-Spring ( 2 )
73-Washer ( 2 )
74-Stop washer ( 2 )
75-Washer ( 2 )
76-Nut ( 2 )
77-Auxiliary mixture control screw ( 6 )
78-Fuel jet for enrichment valve ( 6 )
79-Enrichment valve ( 2 )
80-Diaphragm ( 2 )
81-gasket ( 8 )
82-Screw ( 8 )
83-Washer ( 8 )
84-Fuel line pipe ( 2 )
85-Fuel line pipe ( 2 )
86-Fuel line pipe
87-Fuel line pipe
88-Pipe ( 2 )
89-Fuel line ( 2 )
90-Fuel line ( 8 )
91-Hose ( 4 )
92-Idle sylinode ( 1 )
93-Gasket
94-Hollow bolt ( 2 )
95-Pin ( 2 )
96-Gasket ( 4 )
97-Complete Carburetor gasket kit ( 2 ) |
Motor Meister Inc. 12262
Woodruff Avenue Downey, California 90241
Motor Meister is not
affiliated with Porsche Cars North America or Dr. Ing. h.c.F. Porsche AG.
Porsche®, Porsche Crest® and logos are registered trademarks of Dr. Ing. h.c.F. Porsche
AG. All Copyrights, Registered Trademarks and/or Registered Trade Names are property of
their respective owners.
|
